DARKGLASS MICROTUBES 500 & INFINITY 500 BASS COMBO AMPS
Introducing the Darkglass Infinity 500 and Microtubes Bass Combo Amps—both revolutionary amplifiers that redefine tonal possibilities. With an array of extensive fine-tuning options, these powerhouse combos are the go-to choice for bassists in both live gigs and studio sessions. Choose your sonic signature with the 2x10 or 1x12 configurations, each delivering a formidable 500 watts of power.
Portable yet potent, Darkglass combos are designed for musicians who demand versatility across venues, rehearsals, and home setups.
M500 Microtubes Combos
Front Panel Features
Active/Passive:
Attenuates input signal for active instruments
Darkglass Analog Preamp
Four-Band Ultra Quiet Equalizer:
Featuring push potentiometers for low-mid (500Hz/1 kHz) and high-mid (1.5 kHz/3 kHz) adjustment.
Drive (Vintage Microtubes & Microtubes B3K):
Push between two distortions using the Blend, Level, & Drive controls
Compression:
Automatic gain adjustment, allowing dynamics shaping.
Master with Mute:
Controls overall volume while providing instant silence with a push.
Headphone Output:
Allows for private listening and practice sessions without disturbing others.
Back Panel Features
DI Output with Pre/Post Switch:
Choose between pre or post-EQ signal for the DI XLR output.
Ground Lift for DI XLR Output:
Minimize unwanted noise by lifting the ground of the DI output.
Auxiliary Input for Backing Tracks:
Conveniently play with backing tracks or external audio sources.
Effect Loop (Send/Return):
Connect external effects pedals or processors seamlessly.
Footswitch:
Enable hands-free control with an external footswitch.Compatible with all Darkglass footswitches.
External Speaker Combo:
Connect to an additional external speaker setup.
Infinity Combos
Front Panel Features
Five-position Preset Selector Input:
Push ON/OFF. effects loop
Compression:
Push to select the compressor
Drive:
Push to select drive mode: OFF/VMT/B3K and more.
Tone/Filter:
Push to select between adjusting the drive tone or octave filter.
Level:
Push to select between adjusting the drive level or tweeter level.
Blend/Blend:
Push to select between adjusting drive blend or octave blend.
Preset:
Push to select IR for Post DI & Headphone OUT.
EQ section:
Low Shelf/250 Hz/500 Hz/1.5 kHz/3 kHz/High Shelf.
Master:
Push for Mute + Tuner.
Back Panel Features
Headphone Output
Power switch
Ground Lift switch
MIDI IN:
7-pin DIN connector compatible with Darkglass MIDI footswitch.
USB C Connector
USB-C port unlocks Combo’s USB audio interface capabilities
Post DI OUT XLR
Pre DI OUT XLR
Line IN
This input accepts +4 dBu line-level signals
Line OUT
Use this connector to send your signal to the line input of a console, interface, etc
Effect Loop (Send/Return)
Connect external effects pedals or processors seamlessly.
External Speakon Combo Jack
Connect to an additional external speaker setup.